DT800 NMEA 0183 Transducer Plastic 12 Deg Tilt

This version of the DT800 is a thru-hull transducer for depth and temperature, with an NMEA 0183 interface. It has a plastic housing with a self-closing valve to minimize water intrusion when removing the insert.

This 12 deg tilt version is suitable for deadrise angles from 8 deg to 15 deg. The ceramic element is tilted inside the transducer to compensate for the boats deadrise (angle of the hull). This aims the beam directly at the bottom for accurate readings.

Product Features

• NMEA 0183 interface with attached 10M cable with bare ends (can be extended to 100M)
• Data update rate 1/second
• 235kHz output will not interfere with fishfinders
• Minimum depth 0.4M (1.3 Ft)
• Maximum depth 100M (330 Ft)
• For digital readouts only, not for use with graphing fishfinders
• Blanking plug included
• Maximum hull thickness 54mm (2 1/8")
• Minimum hull thickness 6.3mm (0.25")

This transducer has an NMEA 0183 interface. The cable has two conductors for the NMEA 0183 interface and two for the 12V power supply to the transducer circuitry.

The image shows a DT800 with a tilted transducer element and plastic housing. The DT800 is available in zero, 12 deg and 20 deg tilt versions, with output of NMEA 0183 or NMEA 2000, and with plastic, bronze or stainless housings.