Furuno 527ID-IHN Fishfinder Transducer M260-FUR

The M260 is a 1kW in-hull broadband fishfinder transducer with the same performance as the B260 and TM260. This is a depth-only transducer that mounts inside a hull. The active element mounts in a tank (included) which is glued to the hull and filled with non-toxic antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal.

This '-FUR' version of the transducer is a special non-diplexed model for Furuno sounders/fishfinders that use a bare wire connection, including the FCV295, FCV1100 and DFF3. It has a fixed cable and cannot be used with other fishfinders or sounders.

Product Features

• In-hull unit with tank
• Frequency 50/200 kHz
• Beam cone 19 deg at 50 kHz, 6 deg at 200 kHz
• Maximum depth range 1800-2500 ft at 50 kHz, 700-1000 ft at 200kHz
• Tank can be cut to adjust for hull deadrise
• Tank should be epoxied to hull
• Tank should be filled with non-toxic antifreeze (not mineral oil)
• Transducer bolts into top of tank as shown