Garmin 010-10641-00 Fishfinder Transducer M260-6BRV2

The M260 is a depth-only transducer that mounts inside a hull - no hole is needed in the hull. The active element mounts in a tank (included) which is glued to the hull and filled with antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal.

This version of the transducer has a Garmin 6-pin connector and is for use with the GSD22 only. This model is not for use with the GSD21 - a different version is sold for the GSD21.

Product Features

• In-hull unit with tank
• Frequency 50/200 kHz
• Beam cone 19 deg at 50 kHz, 6 deg at 200 kHz
• Maximum depth range 1800-2500 ft at 50 kHz, 700-1000 ft at 200kHz
• RMS power 1000W
• Tank can be cut to adjust for hull deadrise
• Tank should be epoxied to hull
• Tank should be filled with non-toxic antifreeze (not mineral oil)
• Transducer bolts into top of tank as shown
• 10M cable attached

Video of M260 Installation

Sound quality is poor in this video