Humminbird M260 Fishfinder Transducer M260-HB

The M260 is a 1kW in-hull broadband fishfinder transducer with the same performance as the B260 and TM260. This is a depth-only transducer that mounts inside a hull. The active element mounts in a tank (included) which is glued to the hull and filled with non-toxic antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal.

The M260 is shipped as a generic 'Mix and Match' transducer plus a brand-specific adapter cable. If you change fishfinder brands in the future, you can continue to use the transducer with a new adapter cable.

This '-HB' version of the transducer is for Humminbird sounders and fishfinders that use the #9 Humminbird transducer connector, including the 800, 900 and 1100 series (except for the 967 3D).

Product Features

• In-hull unit with tank
• Frequency 50/200 kHz
• Beam cone 19 deg at 50 kHz, 6 deg at 200 kHz
• Maximum depth range 1800-2500 ft at 50 kHz, 700-1000 ft at 200kHz
• Tank can be cut to adjust for hull deadrise
• Tank should be epoxied to hull
• Tank should be filled with non-toxic antifreeze (not mineral oil)
• Transducer bolts into top of tank as shown