Lowrance 120-37 Yamaha Engine Interface

This 12 ft interface cable connects a compatible Yamaha outboard engine to an NMEA 2000 network. Once the connection is made, engine data is available on the network for any display to use. A Lowrance T-connector is included with this interface.

Compatible Engines

• F50
• F60
• F75
• F90
• F115
• F150
• F200
• F225
• F250

Engine Data Available

• Engine RPM
• Boost Pressure
• Engine Trim: 2006 and later
• Oil Pressure
• Engine Temp: 2006 and later
• Alternator Voltage
• Fuel Rate
• Hours Used
• Water Pressure
• Fuel Economy – if a speed source is on the network
• Diagnostics

For more information see the document posted below which is also available on the Lowrance website.

If your boat has a Yamaha Command Link network installed, do not use this connector, but the Maretron MARE-003 or MARE-002 Command Link - NMEA 2000 interface cables as the engine data is already present on the Command Link network and just has to be communicated to the NMEA 2000 network or device.

The image shows what appears to be a female NMEA 2000 connector on this interface cable. This is incorrect - the actual cable has a male connector that fits into a T on the network backbone.