Lowrance Simrad 21-001 Fishfinder Transducer B60-20-BL

Important : there are two versions of this transducer available. One has a fixed cable and will work with all Lowrance equipment that uses the gray or blue 7-pin transducer connector, including the HDS series. The other is a Mix and Match version with an adapter cable, and this newer version is for use only with the Lowrance HDS series, and Simrad NSE, NSS, NSO and will not work with older Lowrance equipment. When you place an order for this item advise us by email which version you need.

The B60 is a 600W through-hull low-profile fishfinder transducer with a bronze housing and a temperature sensor. The 20 deg tilt version is suitable for deadrise angles from 16 deg to 24 deg. The ceramic element is tilted inside the transducer to compensate for the boats deadrise (angle of the hull). This aims the beam directly at the bottom for accurate readings.

Product Features

• Power handling capacity 600W RMS
• 50kHz/200kHz frequency
• Usable shaft length 2.70" (68.5mm) less thickness of hull
• No external housing needed to compensate for deadrise, no effect on boat performance
• Ideal for center-console and trailered boats
• Hole size 2.375" (60mm)
• Housing protrudes 0.19" outside hull (5mm)
• Arrow on cap points toward keel to align during installation
• Beam 45 deg at 50 kHz, 12 deg at 200kHz
• Maximum depth 800-1200 ft @ 50kHz (235-353 meters)
• Maximum depth 400-700 ft @ 200kHz (118-206 meters)