Lowrance Simrad B117 Fishfinder Transducer B117-BL

Important : there are two versions of this transducer available. One has a fixed cable and will work with all Lowrance equipment that uses the gray or blue 7-pin transducer connector, including the HDS series. The other is a Mix and Match version with an adapter cable, and this newer version is for use only with the Lowrance HDS series, and Simrad NSE, NSS, NSO and will not work with older Lowrance equipment. When you place an order for this item advise us by email which version you need.

The B117 is a 600W through-hull low-profile depth and temperature transducer with a bronze housing, that operates at fixed 50kHz and 200kHz frequencies. It has a non-retractable insert. The B117 is a zero-tilt version of the B60 and is designed for installation only in the flat bottom of a boat. The beam width is 45 degrees at 50 kHz and 12 degrees at 200 kHz. The B117 is ideal for center-console and trailered boats, and has a maximum depth range of 800-1200 ft at 50 kHz and 400-700 ft at 200 kHz.