Maretron CG1 Micro Bulk Cable Per Meter

This micro cable is sold by the meter. This cable can be used either as both network trunk and drop cable on smaller boats with an all-micro network, or as drop cable on larger boats with a mini trunk. Use the Maretron field-attachable micro connectors with this cable to create finished lengths.

Use the Quantity field to order the number of meters of cable required (1 meter = 3.28 ft). Cable is always shipped as one continuous length.

Micro/Mid Cable Specifications

• Micro: 2 x 22AWG power conductors, 18.1 ohms/1000ft, red/black
• Micro: 2 x 22AWG data conductors, white/blue
• Micro: 1 x 22AWG drain wire
• Micro: PVC gray cover
• Mid: 2 x 16AWG power conductors, 4.1 ohms/1000ft, red/black
• Mid: 2 x 20AWG data conductors, white/blue
• Mid: 1 x 20AWG drain wire
• Mid: PVC gray or blue outer cover to color-code wiring
• Micro/Mid connectors rated at 4A max
• For 12V systems only

Maretron makes three sizes of cable: micro, mid and mini. Micro cable is the smallest, and mini cable the largest. Mid cable uses micro connectors, but has larger gauge power conductors in the wire to meet some regulatory requirements. Mid cable will also give a lower power voltage drop along long cable lengths when used as the network backbone or trunk.

Maretron micro and mid cable is for use on smaller boats where the total cable length between any two points on the network does not exceed 100 meters i.e. most recreational boats. It can also be used as drop cable on boats that have a mini trunk cable. All Maretron sensors, displays and transducers have connectors for micro/mid cable. Cable adapters are needed to connect micro/mid cable to mini cable.