Maretron MARE-002 Yamaha Command Link Device Interface

This cable connects an NMEA 2000 display to a Yamaha Command Link network. One end of the cable has a standard female NMEA 2000 light cable connector to connect to the display, and the other end has a Command Link connector. Use this cable when you have a single NMEA 2000 display but no NMEA 2000 network.

If you are trying to connect a Command Link network to an NMEA 2000 network backbone (e.g. to extract engine data from a Yamaha engine for use by various devices connected to the NMEA 2000 network) then you need the Maretron MARE-003 interface.