Maretron RAA100 Rudder Angle Adapter

The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000 network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM200 or DSM250. The RAA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with existing analog gauges so you don't have to give up your existing analog gauges to enjoy the advantages of digitally networked information.

The rudder position sensor is not included with this item. This is an adapter which takes the signal from an existing position sensor and converts it to NMEA 2000 format.

Product Features

• Adapts American standard (240-30 ohm) resistive senders to NMEA 2000® Network
• Adapts European standard (10-180 ohm) resistive senders to NMEA 2000® Network
• Can be Calibrated for any Resistive Sender Ranging from 0-300 Ohms or 300-0 Ohms
• Three Point Electronic Calibration eliminates need for Mechanical Adjustment or Calibration
• Can be Used Standalone Without Analog Gauges
• Powered by the network
• LEN = 2
• Dimensions 3.90" x 1.20" x 1.00"
• Weight 9oz