Maretron TLA100 Tank Level Adapter

The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000 network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM200 or DSM250. The TLA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the TLA100 can be calibrated for any resistance between 0 and 300 ohms. Unlike most tank senders that only work with rectangular tanks, the TLA100 can be calibrated for irregular tank shapes so you know the true level of the tanks. You can also use the TLA100 with analog gauges so you don't have to get rid of existing gauges to enjoy the advantages of digitally networked information.

The tank sender is not included with this item. This is an adapter which takes the signal from an existing tank sender and converts it to NMEA 2000 format.

Applications

• Fuel Tanks
• Fresh Water Tanks
• Grey Water Tanks
• Black Water Tanks
• Live Well Tanks
• Oil Tanks

Product Features

• Adapts American standard (240-30 ohm) resistive senders to NMEA 2000® Network
• Adapts European standard (10-180 ohm) resistive senders to NMEA 2000® Network
• Calibrated for any Resistance Range from 0 to 300 Ohms or 300 to 0 Ohms
• Accommodates Irregularly Shaped Tanks with 16 Point Calibration
• 16 Programmable Tank Types Including Fuel, Fresh Water, Waste Water, Live Well
• Programmable Tank Number(s) Up to 16 per Tank Type
• Programmable Tank Capacity
• Works Alongside of Analog Gauges
• Can be Used Standalone without Analog Gauges
• Powered by the network
• LEN = 2
• Dimensions 3.90" x 1.20" x 1.00"
• Weight 9oz