Navman Simrad P79 Fishfinder Transducer P79-6N

The P79 is an in-hull 600W fishfinder transducer. The active element mounts in a small round tank (included) which is epoxied to the hull and filled with non-toxic antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal. The P79 cannot measure water temperature.

The P79 is shipped as a generic 'Mix and Match' transducer plus a brand-specific adapter cable. If you change fishfinder brands in the future, you can continue to use the transducer with a new adapter cable. (Note -2, -BB, -BL, -FARIA, -FISO models are made with fixed cables.)

This '-6N' version of the transducer is for Navman sounders and fishfinders that use the Navman 6-pin transducer connector, including the M121, M81, and the Explorer series, and the Simrad NX.

Product Features

• In-hull unit with plastic housing
• Frequency 50/200 kHz
• Beam cone 45 deg at 50 kHz, 12 deg at 200 kHz
• Maximum depth range 800-1200 ft at 50 kHz, 400-700 ft at 200kHz
• RMS power 600W
• Adjusts to hull deadrise angles of 2 deg to 22 deg
• Tank should be epoxied to hull
• Tank should be filled with non-toxic antifreeze (propylene glycol). Do not use mineral oil.
• Transducer screws into top of tank as shown
• Can be used in aluminum hulls under 0.38mm thick (0.150")
• Can be used in RIBs
• Can be used in sailboats with solid glass hulls