Raymarine E66008 Fishfinder Transducer P79-RAY

The P79 is an in-hull 600W fishfinder transducer. The active element mounts in a small round tank (included) which is epoxied to the hull and filled with non-toxic antifreeze. This transducer is for use with solid fiberglass hulls only. Cored hulls will impede the signal. The P79 cannot measure water temperature.

The P79 is shipped as a generic 'Mix and Match' transducer plus a brand-specific adapter cable. If you change fishfinder brands in the future, you can continue to use the transducer with a new adapter cable.

This '-RAY' version of the transducer is for Raymarine sounders and fishfinders that use the DSM300 transducer connector. This includes the DSM30, DSM300, DSM250, L755, L760, L1250, L1260, V820 and V850. Do not use this version for the DSM25 or A-Series.

Product Features

• In-hull unit with plastic housing
• Frequency 50/200 kHz
• Beam cone 45 deg at 50 kHz, 12 deg at 200 kHz
• Maximum depth range 800-1200 ft at 50 kHz, 400-700 ft at 200kHz
• RMS power 600W
• Adjusts to hull deadrise angles of 2 deg to 22 deg
• Tank should be epoxied to hull
• Tank should be filled with non-toxic antifreeze (propylene glycol). Do not use mineral oil.
• Transducer screws into top of tank as shown
• Can be used in aluminum hulls under 0.38mm thick (0.150")
• Can be used in RIBs
• Can be used in sailboats with solid glass hulls