Raymarine E66086 Fishfinder Transducer B60-12-RAY

The B60 is a 600W through-hull low-profile fishfinder transducer with a bronze housing and a temperature sensor. The 12 deg tilt version is suitable for deadrise angles from 8 deg to 15 deg. The ceramic element is tilted inside the transducer to compensate for the boats deadrise (angle of the hull). This aims the beam directly at the bottom for accurate readings.

The B60 is shipped as a generic 'Mix and Match' transducer plus a brand-specific adapter cable. If you change fishfinder brands in the future, you can continue to use the transducer with a new adapter cable. (Note -BL and -BB models are made with fixed cables and cannot be adapted to other brands.)

This '-RAY' version of the transducer is for Raymarine sounders and fishfinders that use the DSM300 transducer connector. This includes the DSM30, DSM300, DSM250, L755, L760, L1250, L1260, V820 and V850. Do not use this version for the DSM25 or A-Series.

Product Features

• Power handling capacity 600W RMS
• 50kHz/200kHz frequency
• Usable shaft length 2.70" (68.5mm) less thickness of hull
• No external housing needed to compensate for deadrise, no effect on boat performance
• Ideal for center-console and trailered boats
• Hole size 2.375" (60mm)
• Housing protrudes 0.19" outside hull (5mm)
• Arrow on cap points toward keel to align during installation
• Beam 45 deg at 50 kHz, 12 deg at 200kHz
• Maximum depth 800-1200 ft @ 50kHz (235-353 meters)
• Maximum depth 400-700 ft @ 200kHz (118-206 meters)