Raymarine Fishfinder Transducer P319-RAYA

The P319 is a 600W through-hull low-profile depth and temperature transducer with a plastic housing, that operates at 50kHz and 200kHz. It has a fixed (non-retractable) insert. The P319 is designed for installation only in the flat bottom of a boat. It does not have any built-in tilt for deadrise compensation.

P319s are now made as a generic 'mix and match' (MM) transducer with a short 2M pigtail ending in an Airmar 5-pin connector. Airmar mix and match 600W adapter cables connect to the pigtail and terminate in a connector that is specific to a brand of sounder or fishfinder. The total cable length with adapter installed is 10 meters. You can replace the adapter cable at a later time if you change your sounder, without having to remove or replace the transducer.

This item consists of the MM transducer plus an adapter cable with a connector for the Raymarine A-Series or DSM25.

Product Features

• Power handling capacity 600W RMS
• 50kHz/200kHz frequency
• Usable shaft length 2.18" (55mm) less thickness of hull
• No deadrise compensation, for flat bottomed sections of the hull
• Ideal for center-console and trailered boats
• Hole size 2.00" (51mm)
• Housing protrudes 0.19" outside hull (5mm)
• Beam 45 deg at 50 kHz, 12 deg at 200kHz
• Maximum depth 800-1200 ft @ 50kHz (235-353 meters)
• Maximum depth 400-700 ft @ 200kHz (118-206 meters)

Airmar Transducer Comparison

• P319, B117, B60, SS60 : 600W Good : Benchmark model for comparison
• B164, SS164 : 1kW Better : 6 times more sensitive at 50 kHz, 2 times more sensitive at 200 kHz
• SS264N : 1kW Best : 50 times more sensitive at 50 kHz, 13 times more sensitive at 200 kHz

The P319 is identical in performance to the B60 with a bronze housing (12/20 deg tilt), the B117 with a bronze housing (zero tilt), and the SS60 with a stainless steel housing (12/20 deg tilt).