Raymarine SS264N Pair with 20 Degree Tilt for DSM400

This SS264 pair consists of one SS264N narrow-beam 200kHz transducer plus one SS264W wide-beam 50kHz transducer.

Airmar has taken the proven B260 thru-hull and split it apart into a low-profile transducer pair. The ceramic elements have been tilted to offset for the deadrise of your boat’s hull. Called the SS264N pair, these transducers are perfect for fast, center console and trailered sportfishing boats, or any vessel that cannot have a thru-hull with a high-performance fairing. The narrow-beam broadband 200 kHz transducer will give you excellent resolution and crisp image detail needed for bottom fishing. The low ringing of this transducer is perfect for finding fish holding tight to the bottom and other structure. The seven element 50 kHz transducer is the same as in the SS264W and is best for deep-water sounding down to 914 m (3,000’).

This version has bare wires for use with the Raymarine DSM400.

The 20 deg tilt transducer pair is suitable for deadrise angles from 16 deg to 24 deg. The ceramic element is tilted inside each transducer to compensate for the boats deadrise (angle of the hull). This aims the beam directly at the bottom for accurate readings.

Product Features

• Power output 1000W RMS
• 1 x SS264N 200kHz transducer with 6 degree beam
• 1 x SS264W 50kHz transducer with 25 degree beam
• 200kHz unit cable plugs into pigtail on 50Khz unit, and 10M cable from 50kHz unit runs up to sounder

Airmar Transducer Comparison

• B60, SS60 : 600W Good : Benchmark model for comparison
• B164, SS164 : 1kW Better : 6 times more sensitive at 50 kHz, 2 times more sensitive at 200 kHz
• SS264N : 1kW Best : 50 times more sensitive at 50 kHz, 13 times more sensitive at 200 kHz